Почините Свои Вещи Сообщество Магазин

Возврат к шагу #2

Отредактированно Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case.
[* black] Remove the ringer switch.
- [* icon_reminder] Note the orientation for reassembly: The red line should be up, and when you're fitting the switch bracket back onto the switch, ensure the switch and actuator are in the same position and connected.
+[* icon_reminder] Note the orientation for reassembly: The red line should be at the top of the button. The notch in the back of the ringer switch button should be in the same position as, and mate with, the mechanical switch on the cable.