Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* red] Unscrew the single captive Phillips #000 screw securing the home button cable.
[* icon_reminder] The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.
+[* icon_reminder] If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable.