Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Stefan Raducu -

Правка отклонена автор Scott Havard

До
После
Без изменений

Шаг Линий

[* black] ''Edit'': the correct temperature is almost 180-200 °C because around the chip there is a little black protection that can go under the chip.
[* black] Set a low air flow: 1 or 2 (on a 1 to 7 scale).
[* black] Now, doing circular movement, you have to reflow for 4-5 minutes.
[* icon_caution] Be careful to reflow only the Wi-Fi chip and not any of the surrounding ICs or circuits.
[* black] After 5 minutes, gradually decrease the temperature from 200 to 0 °C. ( for me work on 350 C
[* black] After 5 minutes, gradually decrease the temperature from 200 to 0 °C. ( for me work on 350 C