Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Set the temperature of the air gun on 280-300°C
[* black] Set thea low air flow onflow; 1 or 2 (on a 1 to 7 scale)scale).
[* black] Set thea low air flow onflow; 1 or 2 (on a 1 to 7 scale)scale).
[* black] Now, doing circular movement, you have to reflow for 4-5 minutes.
[* icon_caution] Be careful to reflow only the wifi chip and not any of the surrounding ICs or circuits.
[* black] After 5 minutes, set the temperature to 250-260 °C for other 5 minutesminutes.
[* icon_caution] Be careful to reflow only the wifi chip and not any of the surrounding ICs or circuits.
[* black] After 5 minutes, set the temperature to 250-260 °C for other 5 minutesminutes.