Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Andrea Giannone -

Правка одобрена автор Andrea Giannone

До
После
Без изменений

Шаг Линий

[* black] Setedit: the correct temperature ofis almost 180-200c because around the air gun on 280-300°Cchip there is a little black protection that can go under the chip.
[* black] Setedit: the correct temperature ofis almost 180-200c because around the air gun on 280-300°Cchip there is a little black protection that can go under the chip.
[* black] Set a low air flow; 1 or 2 (on a 1 to 7 scale).
[* black] Now, doing circular movement, you have to reflow for 4-5 minutes.
[* icon_caution] Be careful to reflow only the wifi chip and not any of the surrounding ICs or circuits.
[* black] After 5 minutes, setdecrease gradually the temperature form 200 to 250-260 °C for other 5 minutes.0c
[* black] After 5 minutes, setdecrease gradually the temperature form 200 to 250-260 °C for other 5 minutes.0c