Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Andy Maness -

Правка одобрена автор Andy Maness

До
После
Без изменений

Шаг Линий

[* black] While pulling the bottom down, remove the back of the camera.
[* icon_caution]
Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.
[* black] While pulling the bottom down, remove the back of the camera.
[* icon_caution]
Be careful no to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.