Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью Alec Cheung -

Правка одобрена автор Alec Cheung

До
После
Без изменений

Шаг Линий

[* greenred] Pull out the 5 white pinhead connectors using an IC (Integrated Circuit) extractor. Pinch the IC extractor just under the top lip of the wire housing.
[* icon_note]
There are two 10 pin connectors, one 8 pin connector, one 7 pin connector, and one 2 pin connector.
[* greenred] Pull out the 5 white pinhead connectors using an IC (Integrated Circuit) extractor. Pinch the IC extractor just under the top lip of the wire housing.
[* icon_note]
There are two 10 pin connectors, one 8 pin connector, one 7 pin connector, and one 2 pin connector.
[* icon_note] When reassembling, there is only one way to reinsert the pinhead connectors. Make sure the orientation matches that of the receiving connector on the motherboard.

Изображение 1

Старая версия

Новая версия