Skip to main content

Changes to Step #9

Edit by Michael Johnson

Правка одобрена by Michael Johnson

Deleted
Added
Unchanged

Step Lines

[* redblack] To remove the back panel's second layer, locate the 9there are eleven screws (outlined in red) running alongtotal that must be removed: four 12mm screws on the sides (outlined in red), five 6mm screws at the top (outlined in orange), and two 8mm screws also at the top of(see next picture).
[* red] First, use
the device and unscrew themPhillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then remove the five 6mm screws at the top.
[* yellow] Remove the two vertical 8 mm screws from the top
.
[* redblack] To remove the back panel's second layer, locate the 9there are eleven screws (outlined in red) running alongtotal that must be removed: four 12mm screws on the sides (outlined in red), five 6mm screws at the top (outlined in orange), and two 8mm screws also at the top of(see next picture).
[* red] First, use
the device and unscrew themPhillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then remove the five 6mm screws at the top.
[* yellow] Remove the two vertical 8 mm screws from the top
.

Image 1

Old Version

New Version

Image 2

No previous image

Added