Перейти к основному содержанию

Changes to Step #9

Edit by Alec Cheung

Правка одобрена автор Alec Cheung

Удален
Добавлено
Без изменений

Шаг Линий

[* black] To remove the back panel's second layer, there are elevennine screws in total that must be removed: four 12mm screws on the sides (outlined in red),red) and five 6mm screws at the top (outlined in orange), and two 8mm screws also at the top (see next pictureorange).
[* black] To remove the back panel's second layer, there are elevennine screws in total that must be removed: four 12mm screws on the sides (outlined in red),red) and five 6mm screws at the top (outlined in orange), and two 8mm screws also at the top (see next pictureorange).
[* red] First, use the Phillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then remove the five 6mm screws at the top.
[* yellow] Remove the two vertical 8 mm screws from the top.

Image 2

Удален