Skip to main content

Changes to Step #9

Edit by Devan Carlson

Правка одобрена by Devan Carlson

Deleted
Added
Unchanged

Step Lines

[* black] To remove the back panel's second layer, there are nine screws in total that must be removed: four 12mm screws on the sides (outlined in red) and five 6mm screws at the top (outlined in orange).
[* red] First, use the Phillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then remove the five 6mm screws at the toptop with the same screwdriver.
[* orange] Then remove the five 6mm screws at the toptop with the same screwdriver.