Перейти к основному содержанию

Changes to Step #9

Edit by Brett Langlois

Правка одобрена автор Brett Langlois

Удален
Добавлено
Без изменений

Шаг Линий

[* black] To remove the back panel's second layer, there are nine screws in total that must be removed: four 12mm screws on the sides (outlined in red) and five 6mm screws at the top (outlined in orange).
[* red] First, useUse the Phillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then removeRemove the five 6mm screws at the top with the same screwdriver.
[* red] First, useUse the Phillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then removeRemove the five 6mm screws at the top with the same screwdriver.