Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Alec Cheung -

Правка одобрена автор Alec Cheung

До
После
Без изменений

Шаг Линий

[* icon_note] '''The bottom panel screws must be removed in order to access the back panel.'''
[* red] There are 4 screw covers and screws (two 8mm and two 12mm) that need to be taken off the bottom. Remove them in the same manner as the back panel with the Phillips #00 screwdriver.
[* icon_reminder] Removeicon_note] Even after removing the four rubber screw covers oncovers, the bottom of the device. Even after removing them, theyadhesive on them should be sticky enough to attach the covers back on when reassembling the device.
[* icon_reminder] Removeicon_note] Even after removing the four rubber screw covers oncovers, the bottom of the device. Even after removing them, theyadhesive on them should be sticky enough to attach the covers back on when reassembling the device.

Изображение 2

Нет предыдущего изображения

Добавлено