Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Miroslav Djuric -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Now for the fun part: cutting some wires...
[* icon_caution] Make sure to cut the proper speaker cables! Check twice, cut once.
-[* black] Locate the Left/Front and the Right/Front speaker cables coming out of the radio.
+[* black] Locate the Left/Front and the Right/Front speaker cables coming out of the radio. There should be two wires for each speaker cable, a Positive and a Negative.
[* black] Use a pair of wire cutters to snip-snip those two cables. Don't cut too close to the radio -- make sure that you leave enough length to strip the wire and reconnect it in the following steps.