Перейти к основному содержанию

Возврат к шагу #18

Редактировать с помощью Miroslav Djuric -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Use a piece of cloth to secure the tweeters inside the hole.
-[* black] Reconnect the car battery and turn on your favorite tunes. Use the fader to switch left/right as well as front/back and ensure all speakers are functioning correctly.
-[* icon_note] The Infinity 10.9t tweeters were a bit too big for the recess, so I left them as you see in the picture.
+[* black] Use a piece of cloth to secure the tweeters inside the hole. It will prevent them from rattling around.
+[* black] Reconnect the car battery and turn on your favorite tunes. Use the fader to switch left-to-right as well as front-to-back and ensure all speakers are functioning correctly.
+[* black] Adjust your fader. There's much more sound coming from the front of the car after installation.
+[* icon_note] The Infinity 10.9t tweeters were a bit too big for the recess, so I left them as you see in the picture. I did not put the factory covers nor anything else over them.