Перейти к основному содержанию

Changes to Step #1

Edit by Dylan Kirkby

Правка одобрена автор Dylan Kirkby

Удален
Добавлено
Без изменений

Шаг Линий

[* redblack] Use the flat end of the spudger to release the clips holding the fan onto the heat sink.
[* icon_reminder] Be careful not to touch the heat paste in the middle of the copper X on
the heat sink.
[* redblack] Use the flat end of the spudger to release the clips holding the fan onto the heat sink.
[* icon_reminder] Be careful not to touch the heat paste in the middle of the copper X on
the heat sink.