Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Edgar Palacios -

Правка одобрена автор Edgar Palacios

До
После
Без изменений

Шаг Линий

[* black] Flip the projector right-side up and turn it so that the back ports are facing you.
[* green] Remove the 7mm metallic hex screws using the plastic flat edge.flat-head screwdriver
[* red] Remove the two black 10mm screws using the torx 10 screwdriver head. The screws are located at the center of the back panel.panel
[* green] Remove the 7mm metallic hex screws using the plastic flat edge.flat-head screwdriver
[* red] Remove the two black 10mm screws using the torx 10 screwdriver head. The screws are located at the center of the back panel.panel