Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use the pointed end of a spudger to floopgently fold the pigpower/sleep button bracket down from the top of the rear case.
[* black] RemoveUse tweezers to grab and remove the button.
[* icon_reminder] For reassembly, note the orientation—the metal bar should fold flat and face downwards.

[* icon_note] You may need to pushIf you can't get a hold on the thinger inpower button from inside the case, use a spudger to grabberslightly push it within from the tweeziesoutside.
[* black] Use the pointed end of a spudger to floopgently fold the pigpower/sleep button bracket down from the top of the rear case.
[* black] RemoveUse tweezers to grab and remove the button.
[* icon_reminder] For reassembly, note the orientation—the metal bar should fold flat and face downwards.

[* icon_note] You may need to pushIf you can't get a hold on the thinger inpower button from inside the case, use a spudger to grabberslightly push it within from the tweeziesoutside.