Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] somethingThe screw hole to the right of the lightning connector has a contact bracket wrapped around it. Remove it and note the orientation for reassembly.
[* icon_reminder] The flat portion of the contact clip should rest against the speaker, as shown.
[* icon_note] The alignment bracket on the far end of the speaker assembly is adhered, but may fall off if handled aggressively.
[* icon_reminder] The angled end should face up and line up with the outside edge of the speaker.
[* black] somethingThe screw hole to the right of the lightning connector has a contact bracket wrapped around it. Remove it and note the orientation for reassembly.
[* icon_reminder] The flat portion of the contact clip should rest against the speaker, as shown.
[* icon_note] The alignment bracket on the far end of the speaker assembly is adhered, but may fall off if handled aggressively.
[* icon_reminder] The angled end should face up and line up with the outside edge of the speaker.