Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Randy Fromm -

Правка одобрена автор Randy Fromm

До
После
Без изменений

Шаг Линий

[* black] Make note of how the wires are connected to the componentscomponents to aid reassembly.
[* black] Make note of how the wires are connected to the componentscomponents to aid reassembly.
[* black] Then remove the connectors (spaded lugs) from the circuit components as shown in the second image.
[* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.''
[*
black] ''YouYou should be able to remove the connectors easily by hand by pinching the lug between your fingers and pulling in the directdirection of the wire. DO NOT pull on the wire asattached wire..
[* black] If necessary,
you mightcan you needle-nose pliers to grasp the lug shank firmly and then gently pull itthe lug in the direction of the attached wire.
[* black] Gently bend the disconnected wires back and
out of the connector.''work area.
[* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.''
[*
black] ''YouYou should be able to remove the connectors easily by hand by pinching the lug between your fingers and pulling in the directdirection of the wire. DO NOT pull on the wire asattached wire..
[* black] If necessary,
you mightcan you needle-nose pliers to grasp the lug shank firmly and then gently pull itthe lug in the direction of the attached wire.
[* black] Gently bend the disconnected wires back and
out of the connector.''work area.