Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью Kari Bachman -

Правка одобрена автор Kari Bachman

До
После
Без изменений

Шаг Линий

[* black] Make note of how the wires are connectedconnect to the components to aid reassembly.
[* black] Make note of how the wires are connectedconnect to the components to aid reassembly.
[* black] Then remove the connectors (spaded lugs) from the circuit components as shown in the second image.
[* icon_caution] ''DO NOT pull on the wires as you might pull them out of the connectors.''
[* black] You should be able to remove the connectors easily by hand by pinching the lug between your fingers and pulling in the direction of the attached wire..
[* black] If necessary, you can you needle-nose pliers to grasp the lug shank firmly and then gently pull the lug in the direction of the attached wire.
[* black] Gently bend the disconnected wires back and out of the work area.