Возврат к шагу #5
Редактировать с помощью Kari Bachman -
Правка одобрена автор Kari Bachman
- До
- После
- Без изменений
Шаг Линий
[* black] |
[* black] |
[* red] Remove the connectors (spaded lugs) from the circuit components as shown in the second image. |
[* icon_caution] ''DO NOT pull on the wires, as you might pull them out of the connectors.'' |
[* black] You should be able to remove each connector easily by hand. Pinch the lug between your fingers and pull in the direction of the attached wire. |
[* black] If necessary, use needle-nose pliers to grasp the lug shank firmly. Gently pull the lug in the direction of the attached wire. |
[* black] Gently bend the disconnected wires back and out of the work area. |