Возврат к шагу #6
Редактировать с помощью Kari Bachman -
Правка одобрена автор Kari Bachman
- До
- После
- Без изменений
Шаг Линий
| [* black] Using a 7/32" nut driver, remove the hex nut that secures the power supply to the base of the kettle. |
| [* black] Using a pair of tweezers, remove the split-ring lock washer located under the nut. (It may be hard to find in low light.) |
| [* black] Using a pair of tweezers, remove the split-ring lock washer located under the nut. (It may be hard to find in low light.) |