Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #7

Редактировать с помощью Kari Bachman -

Правка одобрена автор Kari Bachman

До
После
Без изменений

Шаг Линий

[* black] UsingGrasping the wire that is still connected to the power supply, carefully lift the power supply off of the threaded stud to which it was coupled.
[* black] At this point you shouldwill have removed three pieces removed from the kettle:
[* black] oneOne (1) 7/327/32' hex nut (left red circle)nut.
[* black] oneOne (1) 7/32" split-ring lock washer (right red circle)washer.
[* black] oneOne (1) power supply unit (red arrow) with wire attached. The wire can be removed and placed on the replacement component prior to reassemblyunit.
[* black] UsingGrasping the wire that is still connected to the power supply, carefully lift the power supply off of the threaded stud to which it was coupled.
[* black] At this point you shouldwill have removed three pieces removed from the kettle:
[* black] oneOne (1) 7/327/32' hex nut (left red circle)nut.
[* black] oneOne (1) 7/32" split-ring lock washer (right red circle)washer.
[* black] oneOne (1) power supply unit (red arrow) with wire attached. The wire can be removed and placed on the replacement component prior to reassemblyunit.