Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Randy Fromm -

Правка одобрена автор Randy Fromm

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereFIRST IMAGE: After removing the power supply, and with the kettle handle to your right, use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that was under the nut.
[* black] SECOND IMAGE: Roll the kettle so that the handle is now on the left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that was under the nut
.
[* black] Insert wisdom hereFIRST IMAGE: After removing the power supply, and with the kettle handle to your right, use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that was under the nut.
[* black] SECOND IMAGE: Roll the kettle so that the handle is now on the left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that was under the nut
.