Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Kari Bachman -

Правка одобрена автор Kari Bachman

До
После
Без изменений

Шаг Линий

[* black] FIRST IMAGE: After removingRemove the power supply, and withsupply. Align the kettle as shown, with the handle to your right, useright. Use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that waslocated under the nut.
[* black] SECOND IMAGE: Roll the kettle over so that the handle is now on theyour left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that waslocated under the nut.
[* black] FIRST IMAGE: After removingRemove the power supply, and withsupply. Align the kettle as shown, with the handle to your right, useright. Use the 7/32" nut driver to remove the 7/32" nut from the stud clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that waslocated under the nut.
[* black] SECOND IMAGE: Roll the kettle over so that the handle is now on theyour left. Use the 7/32" nut driver to remove the 7/32" nut from the final stud, now anti-clockwise from where the power supply was attached.
[* black] Use tweezers to remove the split-ring lock washer that waslocated under the nut.