Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #11

Редактировать с помощью Wesley Burson -

Правка одобрена автор Wesley Burson

До
После
Без изменений

Шаг Линий

[* black] flip it over and heat the glass using a heat gun, and insert your plastic opening tool.
[* black] slowly work your way around the device reheating as needed.
[* icon_caution] make sure the tool does not go too far into the device as it can break the lcd.
[* icon_caution] When heating, don't use too much heat as you can burn the lcd.