Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #32

Редактировать с помощью Jaime -

Правка одобрена автор Jaime

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Starting in the optical drive area, slide the plastic opening tool under the top cover, prying up each side to loosen it from the computer.
[* black] Remove three screws where the switchscrew attaching the cover meetsto the display assembly area. The two on the outsides are 5mm long and the heads aresystem board. It is 4 mm wide. The one in the middle is 5 mm long and the head is 45 mm wide.
[* black] Remove three screws where the switchscrew attaching the cover meetsto the display assembly area. The two on the outsides are 5mm long and the heads aresystem board. It is 4 mm wide. The one in the middle is 5 mm long and the head is 45 mm wide.
[* icon_note] If you are having a hard time removing the cover, turn the computer over to ensure you remove all screws as mentioned in previous steps.