Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Flip the logic board up.
-[* black] Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.
+[* black] Flip the logic board up toward the volume control buttons to expose the antenna connector.
+[* icon_caution] Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.