Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* red] Remove the four 3.5 mm T5 screws securing the heat sink to the logic board.
[* icon_noteblack] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_reminder] When installing the new heat sink, do not forgetremember to replace[guide|744|replace the thermal pastepaste] underneath the heat sink.
[* icon_noteblack] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_reminder] When installing the new heat sink, do not forgetremember to replace[guide|744|replace the thermal pastepaste] underneath the heat sink.