Перейти к основному содержанию

Изменения к шагу №7

Отредактированно Kevin Van Slyke -

Правка одобрена автор Kevin Van Slyke

Удален
Добавлено
Без изменений

Шаг Линий

[* black] With the wires placed in the correct position, the speaker and speaker cable wires are ready to be soldered.
[* black] Starting with one terminal, place the "tinned" soldering iron on both the terminal and the wire for 1-2 seconds. Then immediately place the soldering wire down on the terminal and speaker cable wire.
[* icon_caution] WARNING: When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.
[* icon_caution] WARNING: When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.
[* black] Repeat this process for each terminal on each speaker.