Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
-[* black] Insert a battery isolation pick underneath the battery connector to disconnect it from the logic board.
+[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
+ [* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.