Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Tarun Thiruma -

Правка одобрена автор Tarun Thiruma

До
После
Без изменений

Шаг Линий

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
+[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.