Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #32

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Insert a plastic opening tool in the holerectangular gap in the upper area of the logic boardboard, and pry itthe logic board up from the rear case.
[* black] SlideWhile keeping the opening tool underneath the logic board, slide it down the length of the inner channelgap to free the upper end of the logic board from the adhesive.
[* black] Insert a plastic opening tool in the holerectangular gap in the upper area of the logic boardboard, and pry itthe logic board up from the rear case.
[* black] SlideWhile keeping the opening tool underneath the logic board, slide it down the length of the inner channelgap to free the upper end of the logic board from the adhesive.