Skip to main content

Изменения к шагу №1

Отредактированно Joshua Byrne -

Правка одобрена автор Joshua Byrne

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_reminder] Remember to check that all the PCI Express cards have been removed and properly stowed.
[* icon_note] Note: The heatsink cover is held in place by a number of tabs and magnets on the underside of the cover. You must release the tabs before you can remove the cover from the enclosure.
[* black] Place the fingers of one hand under the lip of the heatsink cover nearest the logic board. Lift the lip slightly toward the media shelf to release the tabs and magnets under the top face of the cover.
[* black] With your fingers still under the cover’s bottom lip, lift the cover straight up to release the remaining tabs and magnets under the front face of the cover
[* black] Remove the cover from the enclosure.

Изображение 1

Нет предыдущего изображения

Добавлено

Изображение 2

Нет предыдущего изображения

Добавлено