Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Jonathan Pe -

Правка одобрена автор Jonathan Pe

До
После
Без изменений

Шаг Линий

-[* black] To remove the rear camera, use tweezers or the pointy end of your spudger to lift the glued down connector designated in the first picture.
+[* red] To remove the rear camera, use tweezers or the pointy end of your spudger to lift the glued down connector designated in the first picture.
[* black] Once the connector is released from the device, the rear camera can be taken out, as shown in the second picture.
[* black] After this step is complete, you can replace the rear camera with a new one in the spot on the device where the old camera was, as shown in the third picture.