Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #8

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Insert wisdom hereTo complete your continuity test, place one probe at each end of the circuit or component you want to test.
[* icon_note] It doesn't matter which probe goes where; continuity is non-directional.
[* black] As before, if your circuit is continuous, the screen displays a value of zero (or near zero).
[* black] If the screen displays 1 or OL (open loop), there's no continuity—that is, there's no path for electric current to flow from one probe to the other
.
[* black] Insert wisdom hereTo complete your continuity test, place one probe at each end of the circuit or component you want to test.
[* icon_note] It doesn't matter which probe goes where; continuity is non-directional.
[* black] As before, if your circuit is continuous, the screen displays a value of zero (or near zero).
[* black] If the screen displays 1 or OL (open loop), there's no continuity—that is, there's no path for electric current to flow from one probe to the other
.