Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #14

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Switch on your multimeter, and set the dial to resistance mode. (Resistance
[* icon_note] Resistance
is measured in ohms, indicated by the symbol '''Ω'''.)'''Ω''' symbol.
[* black] Most multimeters are not autoranging, meaning you will need to set the correct range for the resistance you intendexpect to measure. If you're not sure, start with the highest setting.
[* black] Switch on your multimeter, and set the dial to resistance mode. (Resistance
[* icon_note] Resistance
is measured in ohms, indicated by the symbol '''Ω'''.)'''Ω''' symbol.
[* black] Most multimeters are not autoranging, meaning you will need to set the correct range for the resistance you intendexpect to measure. If you're not sure, start with the highest setting.