Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Sam -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] The LCD screen should now only be attached by the LCD data cable.
- [* black] Lift the screen from the right side and use a small screwdriver or other small opening device to unlock the connector.
- [* black] Carefully slide the data cable out of the connector.
- [* black] The LCD should still be connected by the backlight cable.
+ [* red] Lift the screen from the right side and use a small screwdriver or other small opening device to unlock the connector.
+ [* red] Carefully slide the data cable out of the connector.
+ [* green] The LCD should still be connected by the backlight cable.