Перейти к основному содержанию

Изменения в этом шаге

Отредактированно David Hoyt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Using a Philips screw driver, unscrew the rear keyboard screw from the bottom of the laptop.
[* black] Note: IgnoreRemove the heatsink panels from the memory and RAM panels. They DO NOT need to be removed in order to replace the logic boardheat sink with a small Phillips-head screwdriver and set them aside.
[* black] PushBe carefully with the tabs shown on both sides and the keyboard will pop upheatsink, as this can be messy if handled improperly. It is a copper heat pipe.
[* black] Note: IgnoreRemove the heatsink panels from the memory and RAM panels. They DO NOT need to be removed in order to replace the logic boardheat sink with a small Phillips-head screwdriver and set them aside.
[* black] PushBe carefully with the tabs shown on both sides and the keyboard will pop upheatsink, as this can be messy if handled improperly. It is a copper heat pipe.

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия