Перейти к основному содержанию

Изменения в этом шаге

Отредактированно Ashley Brooks -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Remove the seven philips screws holding the speaker assembly in place.
[* blackicon_note] Before removing the assembly, disconnect the ribbon cable located at the top left corner of the assembly.
[* blackicon_note] Before removing the assembly, disconnect the ribbon cable located at the top left corner of the assembly.
[* black] Gently remove the board and set aside.