Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #5

Редактировать с помощью ahintz -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Tilt the display backwards. Grip the display from its base to reduce torque.
[* black] Use a spudger to pry the back panel fromupper part of the back of the laptoppanel by pushing in the tabs connecting itlocated along its length.
[* black] Your display should noticon_note] This step is particularly tricky during reassembly, as the plastic must be connectedperfectly aligned or it will not snap in. If it does not snap in any way at this point.correctly, the screen won't fit properly.
[* black]
Carefully lift it from the basedisplay free of the laptop to replace itcase.
[* black] Use a spudger to pry the back panel fromupper part of the back of the laptoppanel by pushing in the tabs connecting itlocated along its length.
[* black] Your display should noticon_note] This step is particularly tricky during reassembly, as the plastic must be connectedperfectly aligned or it will not snap in. If it does not snap in any way at this point.correctly, the screen won't fit properly.
[* black]
Carefully lift it from the basedisplay free of the laptop to replace itcase.