Возврат к шагу #9
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| [* black] Repeat this procedure with the adjacent battery cell: | |
| - | [* black] Apply a small amount |
| + | [* black] Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive. |
| [* black] Alternatively, re-heat this section with your iOpener if needed. | |
| [* black] Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive. |