Возврат к шагу #9
Отредактированно Hamza -
Правка отклонена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| [* red] Remove the four outer 5.3 mm T8 Torx screws (two on each side) securing the display to the upper case. | |
| [* icon_note] Some models may use T9 Torx screws rather than T8. | |
| + | [* icon_reminder] During reassembly, be sure to secure the antenna cable plate under the two T8 Torx screws. |