Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Stephen Bond -

Правка одобрена автор Stephen Bond

До
После
Без изменений

Шаг Линий

[* black] On the underside of the device, removeRemove the panel screw securinglabeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover paneloff.
[* black] The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards.
[* black] Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing)
.
[* black] On the underside of the device, removeRemove the panel screw securinglabeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover paneloff.
[* black] The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards.
[* black] Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing)
.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Нет предыдущего изображения

Добавлено