Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью bushing -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Using ared] Remove two black 4 mm Phillips #00 screwdriver, remove the 2 black 0.159in screws located on the bottom of the camera.
[* black] Next, removeblue] Remove the visible screw located onnext to the side nearest the embossed "Canon" logo (the "right" side from the perspective of looking at the back of the camera)wrist strap attachment point.
[* black] Finally, onyellow] Remove the opposite ("left") side, removescrew next to the last screw located behindUSB port, under the "A/V OUT DIGITAL" flap.
[* black] Using ared] Remove two black 4 mm Phillips #00 screwdriver, remove the 2 black 0.159in screws located on the bottom of the camera.
[* black] Next, removeblue] Remove the visible screw located onnext to the side nearest the embossed "Canon" logo (the "right" side from the perspective of looking at the back of the camera)wrist strap attachment point.
[* black] Finally, onyellow] Remove the opposite ("left") side, removescrew next to the last screw located behindUSB port, under the "A/V OUT DIGITAL" flap.

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия