Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Marco Campos -

Правка одобрена автор Justin Ogihara

До
После
Без изменений

Шаг Линий

[* black] Now remove the HDD and the RAM
- [* black] Remove the HDD by removing the three screws and pulling the Sata connector from the motherboard.
- [* black] Remove the RAM by pulling apart the clips on either side of the top stick. The stick should pop up, then pull it out. Repeat for the bottom stick.
+ [* red] Remove the HDD by removing the three screws and pulling the Sata connector from the motherboard.
+ [* orange] Remove the RAM by pulling apart the clips on either side of the top stick. The stick should pop up, then pull it out. Repeat for the bottom stick.

Изображение 2

Старая версия

Новая версия