Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Use athe point of a spudger to loosen the right speaker cable's connector from its socket on the logic board.
[* icon_note] It is useful
to push downward on both short sideseither side of the right speaker cable connector to "walk" it out of its socket. Be careful withsocket on the corners of the connectors, they can be easily broken off.
[* black] Pull the connector downwards to remove it from its socket
logic board.
[* black] Use athe point of a spudger to loosen the right speaker cable's connector from its socket on the logic board.
[* icon_note] It is useful
to push downward on both short sideseither side of the right speaker cable connector to "walk" it out of its socket. Be careful withsocket on the corners of the connectors, they can be easily broken off.
[* black] Pull the connector downwards to remove it from its socket
logic board.