Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* icon_caution] ***Be very careful*** not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* icon_note] Flip the power supply over to access the DC power cable connection behind the logic board.
-[* black] Squeeze the DC power cable connector tab and pull it straight out of its socket on the back of the logic board.
+[* black] Squeeze the tab on the back side of the DC power cable connector and pull it straight out of its socket on the back of the logic board.