Перейти к основному содержанию

Возврат к шагу #9

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* icon_note] You may find it helpful to set the iMac down on its back on the table for the next couple of steps.
-[* black] Use the flat end of a spudger to push the clip on the side of the AC inlet cable connector inward.
-[* black] While holding on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.
+[* icon_note] You may find it helpful to set the iMac down on its back for the next couple of steps.
+[* black] Use the flat end of a spudger to press the clip on the side of the AC inlet cable connector inward.
+[* black] While pressing on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.