Перейти к основному содержанию

Возврат к шагу #16

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

Без изменений

Шаг Линий

[* black] Insert a spudger under the GPS connector end of the upper component board and lift it up off of its adhesive.
[* icon_caution] Be very careful not to scrape the board against the top of the rear case.
+[* icon_reminder] The GPS antenna cable will slide out of its ZIF socket when you do this. On reassembly, fit the cable back into the socket as you replace the upper component board.